1. 1.0 Horsepower Motor (<-buy now)* unpack

2. Switch off power breaker(s)

3. Disconnect electrical conduit from old motor

4. Unbolt old motor from pump housing (4)

5. Remove outer impeller housing

6. Carefully unscrew impeller

7. Install new motor seal

8. Transplant impeller to new motor axle

9. Implant impeller housing to new motor

10. Replace worn gaskets

11. Attach new motor inside pump housing (4)

12. Carefully connect electrical conduit to new motor **

13. Switch on pump power breaker

* buy the correct compatible motor, reach out for advice

** check if your power supply is 115v or 230v